11 00 Engine in general N20/N26
WARNING: This page is about a different variant/trim than selected.
ENGINE IN GENERAL SPECIFICATION
| Cylinder | 4 | |
| Bore hole | mm | 84 |
| Stroke | mm | 89.6 |
| Effective displacement | cm 3 | 1986 |
| Compression ratio | :1 | 10.0 |
| Max. permissible engine speed | 1/min | 7000 |
| Permissible constant speed | 1/min | 6500 |
| Compression pressure: Minimum and maximum values, Valvetronic at full load. |
7...10 | |
| Compression pressure: Maximum deviation of all cylinders to each other. |
bar | 2 |