00 00 009 Pre-delivery check (BMW dealer)

Quality assurance by BMW Service 

Model:

Vehicle identification number:

(Please tick where appropriate)

If necessary Quick Reference Guide:

Discussed and handed over

Included with the vehicle:

Owner's Handbook(s)

Service Record Booklet

Master key/remote control

If necessary - spare key

The vehicle document case is left in the vehicle:

Glove box

Storage box

Luggage compartment

I hereby confirm that I have received the vehicle in perfect condition.

Place and date

Signature of vehicle owner

Pre-delivery check by BMW Service 

The following work must be carried out on the vehicle by BMW Service prior to delivery.

Model:

Vehicle identification number:

Scopes of inspection:  To be kept with the workshop documents
Battery master switch (1)	O.K.	Not OK	not present
Remove and then carry out following scopes if necessary
Power windows regulator(1): Initialize system
Slide/tilt sunroof/panorama glass roof(1): Initialize system
Accessory items	O.K.	Not OK	not present
For F01, F02 and F03 only: ECE: Place cup holder insert in glove box US: Insert cup holder insert into cup holder receptacle
Install other accessory items
Using BMW Group diagnosis system	O.K.	Not OK	not present
Carry out "CBS pre-delivery check" in the Service Function path under Maintenance
Deactivate transportation mode
Perform the following additional work only with SA5GB: Activating stolen vehicle tracking(1)
Reset average mileage/kilometers driven
Enter first registration
Set on-board date
Set statutory inspection dates(1)
Enter service telephone numbers
BMW TeleServices(1): Activation
Navigation system(1): Activate the roadmap. Check the up-to-dateness of the roadmap and update if necessary.
Check battery, observe notes in the diagnosis system, if applicable, charge battery
Delete fault memory
Carry out vehicle test, eliminate faults if necessary
Engine compartment	O.K.	Not OK	not present
Check for cleanliness
Fluid tank for washer fluid	O.K.	Not OK	not present
Check fluid level and top up if necessary, where required with antifreeze additive
Labels	O.K.	Not OK	not present
Apply label for BMW Group Mobile Service
Body, interior equipment, vehicle underbody	O.K.	Not OK	not present
Check for transportation damage
For F10, F11 and F18 with automatic transmission: Check that the cupholder cover is functioning correctly and engage the cupholder insert correctly if necessary
Spring blocker(1)	O.K.	Not OK	not present
Remove
Tires	O.K.	Not OK	not present
Check tire pressures; if provided, also compact or spare wheel Observe the information on tolerance compensation for RDC.
Initialize Run Flat Indicator (RPA) or tire pressure control
For winter tires(1) attach the label V-max.
Service Record Booklet	O.K.	Not OK	not present
Stamp pre-delivery check/enter vehicle identification number
Attach documentation (glove box/storage box/luggage compartment)	O.K.	Not OK	not present
Owner's Handbook
Service Record Booklet
Contact booklet
BMW Group Mobile Service brochure
Include key or remote control (make note of number)
Indicator/warning lights and Check Control	O.K.	Not OK	not present
Check and remove fault if applicable
Service and parking brake	O.K.	Not OK	not present
Transport and immobilization periods of 3-6 weeks: Check for correct operation
In event of transportation and immobilization periods of more than 6 weeks: Brake in
Interior mirror with digital compass(1)	O.K.	Not OK	not present
Calibrate system
Transportation lock(1) and vehicle cleaning	O.K.	Not OK	not present
Remove the TRANSPORTATION PROTECTIVE FILM
Clean inside and outside of vehicle
Notes:
(1) Denotes optional extra or national-market version. Observe possible changes in this regard.

Date

Mechanic

Workshop Supervisor