SI number

WARNING: This page is about a different variant/trim than selected.

01 12 96 (103)

Consisting of:

1 = 0493621 Plate

NOTE: (Mounting plate) For adapter 17 2 011 - Transmission: A5S 325Z Deletion, only available via tool set

Fig 1: Identifying Adapter Minimum Set - Mechanical Tools AM (172010)

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 0491404 Adapter

NOTE: For connecting the oil cooler lines to the oil dispenser unit - Transmission: A5S 310Z, A5S 560Z, A5S 325Z Deletion, only available via tool set

2 = 0491405 Adapter

NOTE: (Adapter (2 pieces)) For connecting the oil cooler lines to the oil dispenser unit - Transmission: A4S 310R Deletion, only available via tool set

3 = 0491406 Screw

NOTE: (Banjo bolt (2 pieces)) Thread M18x1.5 with nut and gasket for connecting the oil cooler lines to the oil dispenser unit -\Transmission: A5S 440Z Deletion, only available via tool set

4 = 0491407 Screw

NOTE: (Banjo bolt (2 pieces)) Thread M16x1.5 with nut, gasket and thread piece for connecting the oil cooler lines to the oil dispenser unit - transmission: A5S 300J Deletion, only available via tool set

5 = 0491408 Connector

NOTE: For Tecalemit oil dispenser unit Deletion, only available via tool set

6 = 0491409 Connector

NOTE: For Horn oil dispenser unit Deletion, only available via tool set

7 = 0491410 Adapter

NOTE: (Clutch) Scope: 2 pieces Only available as part of complete set

8 = 0491411 Hose

NOTE: (Hose, long)

9 = 0491412 Hose

NOTE: (Hose, short)