61 13 050 Removing and installing/replacing power distribution box in passenger compartment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INFORMATIONS for handling vehicle battery.

Necessary preliminary tasks:

Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT
Detach both battery cables for negative terminal in F03
Remove RIGHT GLOVE BOX WITH HOUSING

Disconnect plug connection (1) from power distribution box in passenger compartment (3) and junction box electronics.

Release screw (2).

Tightening torque: see 1AZ in 61 14 DISTRIBUTION BOX, CURRENT TERMINALS L6 .

Feed out power distribution box in passenger compartment (3) from retaining clips (4) in direction of arrow.

UNLOCK AND DISCONNECT PLUG CONNECTIONS behind.

Fig 1: Disconnecting Plug Connection From Power Distribution Box In Passenger Compartment

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify JUNCTION BOX ELECTRONICS
Modify fuses