31 35 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bar for stabilizer to front axle carrier/steering gear | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | |||
| Angle of rotation | 105 ° | |||
| F03 | M12 | Replace screw. | ||
| Jointing torque | 100 Nm | |||
| F03 | M14 | Replace screw. | ||
| Jointing torque | 165 Nm | |||
| F25 | M10 | 56 Nm | ||
| 2AZ Stabilizer link to stabilizer / damper | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | |||
| Angle of rotation | 45° | |||
| 3AZ Anti-roll bar link to anti-roll bar | F25 | M12 | Replace nut. | 100 Nm |
| 4AZ Anti-roll bar link to damper | F25 | M12 | Replace nut. | 108 Nm |