12 52 Engine wiring harness
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE WIRING HARNESS (N74)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Holder to crankcase | N74 | M8 | 21 Nm | |
| 2AZ Holder at the intake silencer housing | N74 | K50 | 4.6 Nm | |
| 3AZ Ground for ignition coils | N74 | M5 | 3 Nm | |
| 4AZ Holder at the cylinder head | N74 | M6 | 10 Nm | |
| 5AZ Cable channel to cylinder head cover | N74 | M6 | 10 Nm | |
| 6AZ Front shaft on the gear case cover | N74 | M6 | 10 Nm | |
| N74 | M5 | 4.5 Nm |