84 10 720 Removing and installing/replacing base plate (in center armrest at rear)

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 341

Necessary preliminary tasks:

Fold down center armrest
Open upper armrest section

Slide in special tool 00 9 341 as pictured and release catch.

Remove base plate (1) in direction of arrow.

Fig 1: Removing Base Plate Using Special Tool (00 9 341)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect, remove base plate.

Installation:

Catches (2) must not be damaged.

Ensure correct routing of cables.

Fig 2: Identifying Plug Connections And Catches

Courtesy of BMW OF NORTH AMERICA, INC.