26 20 000 Removing and installing front propeller shaft
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Do not move vehicle with engine power once propeller shaft has been removed.
IMPORTANT:
On all-wheel drive vehicles with defective, non-engaging drive, it is imperative that the following information is taken account of:
Necessary preliminary tasks:
- Remove UNDERBODY PROTECTION and retaining plate on left.
- Remove holder For exhaust system from gearbox.
Tightening torque 18 20 1AZ .
Release screws.
Tightening torque 26 11 7AZ .
Installation note:
Replace ZNS bolts.
Release screws.
Tightening torque 26 11 7AZ .
Remove propeller shaft.
Installation note:
Replace ZNS bolts.