LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 572 (Body Equipment - Repair) >> Trim, Covers, Handle Trim >> 51 13 220 Removing and installing / replacing middle trim strip on rear lid

51 13 220 Removing and installing / replacing middle trim strip on rear lid

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Necessary preliminary tasks: 

Release screws (1) on inside of rear lid.

Unlock and disconnect plug connection (2) - rear lid actuation button and plug connection (3) - reversing camera.

Fig 1: Identifying Rear Lid Actuation Button, Reversing Camera Plug Connection And Screws
G08511335Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Graphic originates from F01

Carefully detach trim strip (1) from rear lid (2) with special tool 00 9 317 and remove

Installation: 

If necessary, replace damaged plastic clips (3).

Fig 2: Disconnecting Trim Strip From Rear Lid Using Special Tool (00 9 317)
G08511336Courtesy of BMW OF NORTH AMERICA, INC.