61 67 100 Removing and installing/replacing left high-pressure nozzle of headlight cleaning system

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

13 3 010

Necessary preliminary tasks

REMOVE FRONT BUMPER PANEL .

To prevent excess escape of washer fluid, seal off end of high pressure line with special tool. 13 3 010 .

Fig 1: Sealing High Pressure Line End Using Special Tool (13 3 010)

G04753639

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock high pressure line (1) and detach from high-pressure nozzle (2).

Fig 2: Identifying High Pressure Line With Nozzle

G06895146

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock high-pressure nozzle (1) and remove in direction of arrow rearwards.

Fig 3: Removing High-Pressure Nozzle

G06895147

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Ensure guide (1) is correctly seated.

New washer jets are already preset.

Top up washer fluid.

Carry out function check.

Fig 4: Identifying Washer Jets Guide

G06895148

Courtesy of BMW OF NORTH AMERICA, INC.