41 62 Rear lid
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR LID
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Tailgate to tailgate hinge | F01 / F02 / F03 / F04 / F10 / F12 / F13 / F06 | M8x19.5 8.8 | 18.5 Nm | |
| F11 | ISA M8x22 | 18.5 Nm | ||
| F07 | M8 countersunk screw | 18.5 Nm | ||
| F07 | M10 x 34 | 36 Nm | ||
| 2AZ Tailgate hinge to body | F01 / F02 / F03 / F04 / F10 / F12 / F13 / F06 | nut M8 | 18.5 Nm | |
| F07 | M8 x 20 | 18.5 Nm | ||
| F11 | ISA M8x22 | 27 Nm | ||
| F11 | ISA M6x12 | 10 Nm | ||
| 2AZ Holder to hinge | F12 | M6x12 | 7.6 Nm | |
| 2AZ Hinge holder to body | F12 | M8x16 | 18.5 Nm | |
| 3AZ Hinge bolt | F01 / F02 / F03 / F04 / F10 / F13 / F06 | nut M8 | 18.5 Nm | |
| 4AZ Tailgate lower section to hinge | F07 | M8 x 17 | 18.5 Nm | |
| 5AZ Tailgate lower section hinge to tailgate | F07 | nut M8 | 18.5 Nm | |
| 6AZ Limit position, tailgate to body | F07 | M6 x 21 | 6 Nm | |
| F07 | nutM6 | 6 Nm | ||
| F07 | M12x1.5 | 16 Nm | ||
| 7AZ Ball pin for gas pressure spring to body | F07 | M10 | 36 Nm | |
| 8AZ Earth cable to hinge | F12 | M6 | 8 Nm |