Vibration absorber to rear axle differential, front right
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Slacken nut (1).
Tightening torque 33 17 3AZ
Remove vibration absorber (2).
Installation note:
Replace nut.
First, screw the rear axle differential to the rear axle support with the specified tightening torque.