Vibration absorber to front adapter

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Support rear axle differential.

Slacken nut (1).

Tightening torque 33 17 1AZ .

Remove screw and vibration absorber (2).

Installation note:

Replace nut (1) and screw.

Fig 1: Identifying Front Adapter Vibration Absorber And Screw

Courtesy of BMW OF NORTH AMERICA, INC.