LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Front Axle - Tightening Torques) >> Front Axle Suspension >> 31 10 Front Axle Suspension

31 10 Front Axle Suspension

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT AXLE SUSPENSION

  Type Thread Tightening specifications Dimension
1AZ Front axle support to engine support (screw connection, front, middle, rear) F01 / F02 / F03 / F04 / F07 / F10 / F11 / F12 / F13 / F18 M12 Observe repair instructions. 100 Nm
F25 M12 Replace screws.  
Jointing torque 100 Nm
Angle of rotation 90 °
F10 M5 / F12 M6 / F13 M6 M10 Replace screws.  
Jointing torque 56 Nm
Angle of rotation 90 °
2AZ Thrust zone to front axle support F01 / F02 / F04 / F07 / F10(without M5) / F11 / F12 (without M6) / F13 (without M6) M8 Replace screws.  
Jointing torque 15 Nm
Angle of rotation 90 °
F10 M5 / F12 M6 / F13 M6 M10 Replace screws.  
Jointing torque 56 Nm
Angle of rotation 90 °
F25 M12   110 Nm
3AZ Acoustic strut to front axle support F01 / F02 M8    
Jointing torque 15 Nm
Angle of rotation 90 °