LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Body Equipment - Special Tools) >> Body Equipment >> 51-2190 Adjuster

51-2190 Adjuster

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0494325 512190 Adjuster Minimum set: Mechanical tools MW

NOTE: (door lock tensioner) For pretensioning front and rear door locks when installing. Change to tool through use of noise-optimised locks from 02/2004. Illustration items: 1 = Knurled nut 51 2 191 2 = Support 51 2 192 3 = Guard 51 2 196 4 = Mandrel 51 2 197 [Released]

Storage Location

B44

C44

Fig 1: Identifying Adjuster (0494325)
G04739526Courtesy of BMW OF NORTH AMERICA, INC.

SI number

01 06 02 (864)

Consisting of:

  1. 4 = 0494907 Mandrel
    NOTE: Replaces mandrel 51 2 194 [Released]
  2. 3 = 0494906 Guard
    NOTE: Replaces guard 51 2 193 [Released]
  3. 2 = 0494474 Shaped element
    NOTE: E85 (Discontinued) [Discontinued]
  4. 2 = 0494473 Mandrel
    NOTE: Is replaced by 51 2 197 with the use of noise-optimised locks from 02/2004 Replaced by 51 2 197 (0 494 907) [Replaced]
  5. 2 = 0494472 Guard
    NOTE: Is replaced by 51 2 196 with the use of noise-optimised locks from 02/2004 Replaced by 51 2 196 (0 494 906) [Replaced]
  6. 2 = 0494471 Upholstery
    NOTE: [Released]
  7. 1 = 0494470 Nut
    NOTE: (Knurled nut) Replaced by 00 9 120 (0 490 504) [Released]