84 31 020 Removing and installing/replacing hands-free system speaker
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove TRIM FOR PEDAL ASSEMBLY
Disconnect plug connection (1).
If necessary, release cable tie from catches (2).
Unlock catches (2) and remove speaker (3) from mounting.
Installation:
Catches (2) must not be damaged.
Guide lugs of mounting must be seated in grooves of speaker (3).
Speaker (3) must snap audibly into place in mounting.