65 75 055 Removing and installing/replacing emergency power siren with tilt sensor

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove FRONT LEFT WHEEL ARCH COVER

Release screws (1).

Unfasten plug connection (2) and disconnect.

Remove emergency power siren including bracket (3).

Fig 1: Identifying Emergency Power Siren With Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Release nut (1) and remove emergency power siren with tilt sensor (2).

Fig 2: Identifying Tilt Sensor And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding.