54 34... Topping up/extracting fluid, checking fluid level

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: No changing of the hydraulic fluid necessary.

The hydraulic fluid does not have to be changed because the system is filled with life-time fluid.
Only the approved hydraulic fluid may be used in the event of leaks.
All hydraulic cylinders must be completely extended.

Checking fluid level:

Fluid level must be within the markings (arrow) when the unit is horizontal.

Fig 1: Locating Fluid Level Marking

Courtesy of BMW OF NORTH AMERICA, INC.

Topping up fluid:

Align hydraulic unit horizontally.

Open oil filler plug.

Pour in required amount of fluid from fluid bottle.

Installation:

Check fluid level in the meantime.

Pour in hydraulic fluid only up to marking on fluid reservoir.

Fig 2: Locating Oil Filter Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Protect components and work area with suitable materials (e.g. cloths).

Extracting fluid:

Open oil filler plug.

Tilt hydraulic unit and let fluid flow out or draw off with a suitable auxiliary apparatus.

Fig 3: Locating Oil Filter Plug

Courtesy of BMW OF NORTH AMERICA, INC.