52 13 198 Removing and installing or replacing rear panel on left or right front seat backrest

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Release clips (1) with diagonal cutting pliers.

Remove rear panel (2) downwards with a turning action.

NOTE: Remove remnants of clips.

Fig 1: Removing Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (1) and bore holes (2) on rear panel (3) must not be damaged.

Replace faulty clips.

Fig 2: Identifying Hooks And Bore Holes On Rear Panel

Courtesy of BMW OF NORTH AMERICA, INC.