LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 390 (Collision - Body Panel Repair (E89)) >> 4163 Other Flaps >> 51 71 360 Removing And Installing/Replacing Seal For Rear Lid

51 71 360 Removing And Installing/Replacing Seal For Rear Lid

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks 

The right side is removed in the same way as the left side.

Release screws (1).

Remove seal (2).

G06910703Courtesy of BMW OF NORTH AMERICA, INC.

The right side is removed in the same way as the left side.

Release screw (1).

Lever off seal (2).

Lever off seal (3).

Installation: 

Fig 1: Removing Screws
G06910704Courtesy of BMW OF NORTH AMERICA, INC.