41 61... Checking Hinge For Engine Compartment Lid (For Vehicles With Active Pedestrian Protection System)

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove hinge for engine compartment lid

Open and close hinge (1).

Place hinge (1) on a level surface.

Check holes (2) for dimensional accuracy relative to support.

Courtesy of BMW OF NORTH AMERICA, INC.

Dimension a = 21 mm

Measurement b = 33 mm

Test result:

Hinge is stiff - Replace hinge
Faulty dimensional accuracy - Replace hinge