41 12 557 Replacing Middle Luggage Compartment Floor Stripping Operations (Tail Panel Removed)

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Remove exhaust system (FR number: 1800020)
Remove heat shield
Remove battery (FR number: 6121010)
Remove hydraulic unit (engine) for retractable hard top (FR number: 5437185)

Release snap fasteners (1), disconnect lines.

Unfasten screws (2).

Remove carbon canister (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug (1) and pull cable through luggage compartment floor.

Release screw (2).

Remove positive point.

Unscrew nut (3).

Remove earthing cable.

Courtesy of BMW OF NORTH AMERICA, INC.