LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 390 (Collision - Body Panel Repair (E89)) >> 4100 Body Panel Repair General Information >> 41 00... Soldering Steel Components >> 6. Notes On Melting/Tinning

6. Notes On Melting/Tinning

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Only applicable within the European Union!

European used-car regulations prohibit the use of tin containing lead in motor vehicles introduced after 01.07.2003!

Even out unevenness smaller than 2 mm with filler according to painting handbook

If an exceptional unevenness is larger than 2 mm, use METAL FILLER  .

Only perform in visible areas of the outer skin and on the carrier support.

All areas which have covers on the vehicle are not to be processed.