2. Opening Adhesive Bonds
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
If necessary, open existing PUNCH OR BLIND RIVETS .
Roughly cut out damaged component.
WARNING:
Extract vapors and gases.
Use personal protective clothing/equipment.
Use personal protective clothing/equipment.
Heat adhesive flange with a hot-air blower. Heat components to max. 250 °C object temperature.
The component can be peeled with the aid of pliers. Do not damage adjacent components.
Remove adhesive residue from connecting flange.