51 46... Removing and installing/replacing upper (rear) partition panel
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove COVERS ON ROLLOVER BAR
Release screws (1).
Lever out expander rivets (2).
Remove rear upper partition panel (3).
Installation:
Feed in retaining tabs for expanding rivets (2) between partition and luggage compartment trim panel.
Replace faulty expanding rivets (2).