51 31... Remove windscreen with "Roll Out 2000": Notes

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Windscreen removal system "Roll Out 2000"

Fig 1: Identifying Windscreen Removal System Components (Roll Out 2000)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Both paint and ergonomic and health-endangering damage is minimized with the "Roll Out 2000" system.
Sourcing reference:

WARNING: Follow safety instructions See 5100... SAFETY INSTRUCTIONS FOR WORKING ON CARS WITH AIRBAG SYSTEMS or 72 SAFETY PRECAUTIONS AND GENERAL INFORMATION for working on vehicles with airbag systems (risk of injury).

IMPORTANT: Take care when handling sharp-edged tools and cutting wire (risk of damage to head airbag and window glass).

IMPORTANT: Always keep both suction cups dry and clean to ensure their optimum adhesion on the windscreen.

Lubricate spool if lock rattling becomes too loud.

Always wear safety goggles and protective gloves for your own safety.

Mounting suction cup lifters on windscreen or rear window:

Fig 2: Identifying Suction Cup Lifters Position On Windscreen

Courtesy of BMW OF NORTH AMERICA, INC.

Secure position of suction cup lifters as shown:

Suction cup lifter with double spool
Suction cup lifter with single spool
Window
Cutting wire

Fig 3: Identifying Suction Cup Lifters Position On Windscreen

Courtesy of BMW OF NORTH AMERICA, INC.