Spacer buffers
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Before sticking on new spacer buffers, remove all remaining traces of old spacer buffers completely.
Position of spacer buffers must be observed exactly.
Incorrectly fitted spacer buffers will result in:
- Windscreen glass breakage
- Leakage (if the spacer buffer is in the adhesive area)
- Wind noises