On-the-job safety
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
When working with bonding products (adhesive, cleaning agent, bonding agent, etc.):
- Wear safety goggles, protective gloves and if necessary an apron.
- Ensure rooms are well ventilated.
- Change work clothing contaminated with adhesive immediately.
- Change work clothing contaminated with solvents and swelling agents immediately (keep spare work clothing on hand).
- Take skin protection measures, provide washing facilities including hot water, use silicone-free skin creams
- Provide eye douche facilities, change water regularly (once a month).
- Comply with the relevant safety regulations
- Do not eat, drink or smoke in areas of polyurethane processing.
- All use and safety information of the safety data sheet (SDB) for the applicable product apply. The safety data sheet (SDB) can be obtained from the Aftersales Assistance Portal (ASAP)