LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 382 (Body Equipment - Repair) >> 5131 Front And Rear Window >> 51 31... Notes for bonding sound insulation (SI), doors >> Handling adhesive area on inner door panel

Handling adhesive area on inner door panel

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
HANDLING PROCEDURE FOR INNER DOOR PANEL

Adhesive Cleaning
  1. Butyl bead applied to sound insulation with protective film
  2. Butyl mini-round profile 3 mm from the roller
  3. Butyl round profile 6 mm from the roller
  1. Isohexane (benzine)
  2. 2-propanol (isopropanol)

    Under no circumstances: paint thinning 

  3. Carry out bonding only after an air drying time ≥ 1 min. Air drying time may be omitted if the entire bonding surface is wiped with a dry cloth
  4. After cleaning, the bonding surface may not be touched with hands or fouled again
scientia non olet · About LEMON Manuals