LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 382 (Body Equipment - Repair) >> 5111 Front Bumper >> 51 11... Removing and installing/replacing cover for headlight washer unit on left

51 11... Removing and installing/replacing cover for headlight washer unit on left

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Pull out spray nozzle (1) by cover (2) slightly.

IMPORTANT: When releasing cover (2), grip spray nozzle (1) firmly and then allow to slide back slowly (risk of damage).

Release cover (2) from spray nozzle (1).

Installation: 

Retaining lugs (3) must not be damaged.

Fig 1: Identifying Spray Nozzle With Cover And Lugs
G06911558Courtesy of BMW OF NORTH AMERICA, INC.