LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2016 >> Z4 sDrive35is >> Repair and Diagnosis >> External Pages >> Different car >> Section 375 (Brakes - Repair) >> 3451 Mechanical/Hydraulic Components >> 34 51 527 Removing and installing or replacing DSC hydraulic unit >> When replacing hydraulic unit

When replacing hydraulic unit

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and convert holder (2).

Installation: 

Tightening torque 34 51 5AZ .

Modify DSC CONTROL UNIT  .

Fig 1: Identifying Hydraulic Unit Convert Holder And Screws
G04726702Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals