61 35 095 Removing and installing/replacing control unit/module for seat heating
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .
NOTE:
Move seat completely towards rear/top.
Disconnect plug connection (1).
Open lock (2) in direction of arrow and remove control unit/module for seat heating (3) towards bottom.
Installation:
Make sure control unit/module for seat heating (3) is correctly engaged.