61 31 996 Carrying out steering angle sensor adjustment

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Steering angle sensor adjustment must be carried out:

after adjustment work on the front axle/steering
after all mechanical work on the steering system
after disconnection of battery
after replacement/coding/programming of the following components:
- Fixture for switches of steering column/switch cluster/steering angle sensor
- Dynamic Stability Control (DSC) control unit

Connect vehicle to BMW diagnosis system.

Select and carry out steering angle sensor adjustment under Service functions.