61 31 133 Removing and installing/replacing AV connection socket

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR STORAGE COMPARTMENT

Remove rear cover (1) from center console (2) in direction of arrow.

Disconnect plug connection underneath.

Fig 1: Removing Rear Cover From Centre Console

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Release screw (2).

Raise center console (3) a little.

Open center console storage compartment lid (4).

Fig 2: Identifying Centre Console Storage Compartment Lid And Centre Console With Nuts And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Press connection socket (1) outwards out of center console (2).

Fig 3: Identifying Connection Socket Of Centre Console

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Remove connection socket (2).

Installation:

Make sure connection socket (1) is correctly seated.

Retaining lugs (3) must not be damaged.

Fig 4: Identifying Connection Socket With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.