61 31 011 Removing and installing/replacing volute spring cassette

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Move wheels into straight-ahead position and do not alter this position during the repair work.

Necessary preliminary tasks

Remove STEERING-COLUMN SWITCH CLUSTER

Unlock catches (1).

Press lock (2) and remove volute spring cassette (4) in direction of arrow from fixture for steering column stalk (3).

Fig 1: Removing Volute Spring Cassette From Fixture For Steering Column Stalk

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Do not turn ring (1).
Also turning ring (1) through 360° is not permitted!
Secure ring (1) against unauthorized turning (e.g. with adhesive tape).

Installation:

Notch (3) on ring (1) must line up with arrow (4) on switch (2).

Fig 2: Identifying Notch, Rings And Switch

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Fit volute spring cassette (1) so that guide (2) can slide exactly into associated notch on switch (3).

Fig 3: Identifying Volute Spring Cassette, Guide And Switch

Courtesy of BMW OF NORTH AMERICA, INC.