72 11 Seat Belts
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SEAT BELTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| Seat belt, front: | |||||
| 1AZ | Retractor mechanism - to body | E89 | Replace microencapsulated screws | 36 Nm | |
| 2AZ | Anchor fitting, belt - to front seat | E89 | Replace microencapsulated screws | 44 Nm | |
| 3AZ | Belt deflection fitting - to B-pillar, top | E89 | Replace microencapsulated screws | 90 Nm | |
| 4AZ | Belt strap deflector - to body | E89 | 4 Nm | ||
| 5AZ | Belt tensioner - to front seat | E89 | Replace microencapsulated screws | 38 Nm | |
TIGHTENING TORQUE SPECIFICATION - SEAT BELTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Seat belt, Automatic reel, Lower strap, Anchor fitting, Belt tensioner to body | E36/E31/E38/E39/E46/E52/E53/E83 | Replace screws | 31 Nm | |
| Seat belt on B-pillar | All, except E53 | Replace screws | 31 Nm | ||
| Seat belt/belt tensioner to seat, on Touring also to rear seat backrest | All, except E52/E53 | Replace screws | 48 Nm | ||
| 2AZ | Screws for seatbelt height adjustment on body | All | Replace screws | 22 Nm | |
| 3AZ | Seat belt to seat Install bolt with bolt cement. | E31 | Replace screws | 47 Nm | |
| 4AZ | Seat belt to backrest | E31 | Replace screws | 24 Nm | |
| 5AZ | Headrest to backrest | E31 | 24 Nm | ||
| 6AZ | Seat belt at belt height adjustment (reversing clip) | All | Replace screws | 31 Nm | |
| 7AZ | Tension relief between roller sun blind bracket and backrest lock bracket | E39/2 | 24 Nm | ||
| 8AZ | Retaining angle, belt tensioner to seat rail | E46/E83 | Replace screws | 24 Nm | |
| 9AZ | Slide bar to body | E46 | Replace screws | 44 Nm | |
| 10AZ | Counter-support plate to body, B- and C-pillars | E53 | 39 Nm | ||
| 11AZ | Seat belt to seat (end fitting) | All | Replace screws | 45 Nm | |
| 12AZ | Screw of seatbelt height adjuster to counter-support plate | E53 | Replace screws | 31 Nm | |
| 13AZ | Belt tensioner to seat | E83 | Replace screws | 45 Nm | |
| E52/E53 | Replace screws | 31 Nm | |||
| 14AZ | Inertial reel unit to body/B-pillar | E53/E83 | Replace screws | 31 Nm | |
| 15AZ | Automatic reel on rear seat backrest | E53 | Replace screws | 45 Nm | |
| E83 | Replace screws | 35 Nm | |||
| 16AZ | Belt guide to front seat (sash guide to head restraint clip) | E46 Convertible | Replace screws | 8 Nm | |
| 17AZ | Automatic reel to front seat backrest | E46 Convertible | Replace screws | 39 Nm | |
| 18AZ | Coupling gearing to centering pin | E46 Convertible | 2.5 Nm | ||
| 19AZ | Corner hoop to side panel, inner (B-pillar) | E53/E83 | 3 ±0.5 Nm | ||
| 20AZ | Upper belt loop to body | E83 | Replace screws | 31 Nm | |
| 21AZ | Automatic reel to body | E83 | Replace screws | 31 Nm | |