65 77 Airbag triggering control
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - AIRBAG TRIGGERING CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Airbag control unit to tunnel middle | E70, E71, E72, E82, E84, E88 | 8 Nm | ||
| E89 | 8.5 Nm | ||||
| 2AZ | Sensor, A-pillar | E70 | 8 Nm | ||
| 3AZ | Sensor, B-pillar | E70, E71, E72, E82, E84, E88, E89 | 8 Nm | ||
| 4AZ | Sensor, front door, to inner door panel | E70, E71, E72, E82, E84, E88, E89 | 8 Nm | ||
| 5AZ | Sensor, rear seat, to seat frame | E70 | 8 Nm | ||
| 6AZ | Acceleration sensor to front carrier support | E70, E71, E72, E82, E84, E88, E89 | Replace screws | 8 Nm | |
| 7AZ | Holder, rollover controller to rollover protection | E88 | 4.5 Nm | ||
| 8AZ | Rollover controller to holder | E88 | 5 Nm | ||