52 10 Front seats
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT SEATS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Seat to floor plate | E89 | M10 (trilobular) | Replace Powerlok screw | 44 Nm |
| 2AZ | Backrest frame to seat frame | E89 | 32 Nm | ||
| 3AZ | Mounting, belt buckle deflector | E89 | 3.7 Nm | ||
| 4AZ | Seat depth adjustment to seat mechanism | E89 | 1.1 Nm | ||
| 5AZ | Bracket, control unit, to seat structure | E89 | 2 Nm | ||
| 6AZ | Carrier unit to seat frame | E89 | 9 Nm | ||
| 7AZ | Isofix clip on backrest frame | E89 | M6 | 10 Nm | |
| E89 | M5 | 3 Nm | |||
| 8AZ | Mounting frame to partition | E89 | 3.3 Nm | ||
| 9AZ | Holder, skibag retainer, to body | E89 | 15 Nm | ||
| 10AZ | Trim, seat, outer | E89 | 1 Nm | ||