51 11 Front Bumper
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Amplifier, mounting, bumper, to support, outer | E89 | 8 Nm | ||
| 2AZ | Strut, front panel, to front end | E89, | 8 Nm | ||
| 3AZ | Deformation element to body | E89 | 21 Nm | ||
| 4AZ | Carrier to deformation element | E89 | M6 | 8 Nm | |
| 5AZ | Carrier to deformation element | E89 | 23 Nm | ||