41 33 Front trim panel
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT TRIM PANEL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Front panel to carrier support | E81/E82/E87/E88/E90/E91/E84 | M6 | 10 Nm | |
| E92/E93 | M6 | 12 Nm | |||
| E85/E86/E89 | M8x18 | 19 Nm | |||
| 2AZ | Headlight holder to front panel | E81/E82/E87/E88/E84 | M6x18 | 8 Nm | |
| E90/E91 | M6x18 | 4.5 Nm | |||
| E92/E93 | M6x18 | 6 Nm | |||
| 3AZ | Headlight holder to side panel, front | E81/E82/E87/E88/E90/E91/E92/E93/E84 | Sheet metal screw ST4.8x22 | 2.5 Nm | |
| E90/E91/E92/E93 | M6 | 6 Nm | |||