34 51 Slip control system (DSC)
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Control unit to hydraulic control unit | E89 | Initial tightening Final tightening |
2±0.5 Nm 4.3+0.5 Nm |
|
| 2AZ | DSC sensor to holder | E89 | 8 Nm | ||
| 3AZ | Bracket, DSC sensor, to body | E89 | 8 Nm | ||
| 4AZ | Pulse generator to swivel bearing/wheel carrier | E89 | 8 Nm | ||
| 5AZ | Bracket to hydraulic unit | E89 | 8 Nm | ||
| 6AZ | Bracket, hydraulic unit to body | E89 | 8 Nm | ||