17 00 Coolant
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - COOLANT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hose clamps to coolant hoses 32... 48 mm dia. | All | 2.5 Nm | ||
| 2AZ | Bleed screw (WAF 8) to thermostat housing | All, without E46 | 8 Nm | ||
| Plastic bleed screws to coolant lines | E46 | 2 -0.5/+1 Nm | |||
| 3AZ | Level switch (WAF 30) to coolant expansion tank | All | 3 Nm | ||
| 4AZ | Bleed screw to water valve or auxiliary water pump | E90/E91 | 3.5 Nm | ||