12 62 Coolant Temperature
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - COOLANT TEMPERATURE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Temperature sensor to water flange (glow time/coolant temperature gauge) | M21 | 18 Nm | ||
| M51 | 13 Nm | ||||
| 2AZ | Temperature switch (5.5 °C/17 °C) to fuel filter/cylinder head | M21 | 18 Nm | ||
| 3AZ | Coolant temperature sensor (2- pin plug-in connection) | S38/S50 | 13 Nm | ||
| S85 | M12/1.52 | 13.5 Nm | |||
| All/others | 20 Nm | ||||
| 4AZ | Remote thermometer sensor (2-pin plug-in connection) | All | 20 Nm | ||
| Remote thermometer sensor (4-pin plug-in connection) | M62 | 16 Nm | |||
| S62 | M12 x 1.5 | 14 Nm | |||
| 5AZ | Remote thermometer sensor on coolant flange | S50 | 18 Nm | ||
| 6AZ | Temperature sensor - air | S38/S50 | 13 Nm | ||
| 7AZ | Temperature sensor - oil | S38/S50 | 13 Nm | ||