11 14 Transmission closing plate
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION CLOSING PLATE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | ASA screws Transmission cover plate to crankcase. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K | M6 x 16 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
4 Nm |
| Torque angle | 45 ° | ||||