11 13 Oil sump

WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION - OIL SUMP

		Type	Thread	Tightening specifications	Dimension
1AZ	Plug Oil drain to oil sump.	N52K	M12 x 1.5	Replace sealing ring.	25 Nm
2AZ	ASA screw Oil sump (aluminium) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue).	N52K	M8 x 26	Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque	8 Nm
				Angle of rotation	90 °
3AZ	ASA screw Oil sump (aluminium) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue).	N52K	M8 x 112 M8 x 92	Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque	8 Nm
				Angle of rotation	180 °
4AZ	ASA screw, microencapsulated Oil sump (aluminium) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue).	N52K Allrad	M8 x 36 M8 x 40	Replace microencapsulated screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque	8 Nm
				Angle of rotation	90 °
5AZ	ASA screw Oil sump (sheet metal) to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue).	N52K	M8 x 24	Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque	8 Nm
				Angle of rotation	90 °
6AZ	ASA screw Oil deflector to crankcase lower half. Aluminium screws/bolts are permitted with and without colour coding (blue).	N52K	M6 x 20	Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque	4 Nm
				Angle of rotation	90 °
7AZ	ASA screw Transmission to oil sump.	N52K	M8 x 50		19 Nm
8AZ	Hexagon nut Holder, transmission oil cooler line, to oil sump.	N52K	M6		8 Nm
9AZ	Hexagon nut Holder, coolant hose, to oil sump.	N52K	M6		9 Nm
10AZ	Hexagon screw Holder, coolant hose, to oil sump.	N52K	M10 x 18		21 Nm
11AZ	Hexagon nut Oil level sensor to oil sump.	N52K	M6		8 Nm
12AZ	Hexagon screw Coolant return line to oil sump.	N52K	M10 x 18		41 Nm