11 61 Air intake manifold
WARNING: This page is about a different car, the 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - AIR INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hexagon screw Air intake manifold to cylinder head. |
N52K | M7 x 50 | 15 Nm | |
| 2AZ | Hexagon nut Air intake manifold to cylinder head. |
N52K | AM7 (to DIN 439) | 15 Nm | |
| 3AZ | Hose clamp Clean-air gaiter to connection, throttle valve assembly. |
N52K | L80-100 | 3 Nm | |
| 4AZ | Ejot screw Fuel line to intake manifold |
N52K | 50 x 20 | 6 Nm | |
| 5AZ | Oval-head screw Holder, engine wiring harness, to intake manifold. |
N52K | M6 x 10 | 8 Nm | |