17 11 052 Removing and installing left module carrier (N52K, N54)

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of scalding!

Only perform this work after engine has cooled down.

Necessary preliminary tasks

Remove FAN COWL
N54/N54T only: Remove INTERCOOLER

Release bolts (1) on radiator on left and right.

Tightening torque 17 10 2AZ .

Do not unfasten or detach coolant hose (2).

Do not drain coolant.

Fig 1: Identifying Radiator Bolts And Coolant Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Slide radiator and condenser slightly towards rear.

Feed out left module carrier (1) and remove towards top.

Fig 2: Removing Left Module Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When reinstalling module carrier (1), ensure without fail that the radiator is correctly seated in mounting (2).

Fig 3: Identifying Module Carrier And Radiator Mounting

Courtesy of BMW OF NORTH AMERICA, INC.

Add final details to vehicle.