00...... Notes on Using Repair Instructions, Technical Data, Tightening Torques

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

These repair instructions are intended to help expertly carry out maintenance and repair work.

If there are no cross-references to tightening torques in the repair instructions, the excerpts from the company standard BMW : EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 ; M18 AND M18X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M16 AND M16X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M14 AND M14X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M12 AND M12X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M10 AND M10 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M8 AND M8 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; M6 AND M7 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 ; or M4 AND M5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2 must be observed.

Cross-references to other flat rate units are intended as an aid and can refer to a complete work operation or merely to individual work steps contained therein.