Belt buckle
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
The tongue on the belt strap must easily snap into place with an audible click.
When the "Press" button is pressed, the tongue must be ejected from the buckle under spring pressure.
NOTE:
If the seat belt is damaged, you must replace the seat belt completely after consulting the customer; issue a separate invoice for this work.
Instructions on how to proceed, refer to 72 11... CHECKING AUTOMATIC SAFETY BELT .