18 20 Exhaust system suspension
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - EXHAUST SYSTEM SUSPENSION
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Clamp to front pipe holder |
N54 |
M8 |
|
19 Nm |
| 2AZ Bracket, primary cat., to primary cat. |
N54 |
M8 |
|
19 Nm |
| 3AZ Clamp to exhaust system |
N54 |
M10 |
|
45 Nm |